Loading... Please wait...

Categories

AG800

Anti-Graffiti Clearcoat

AG800 is a premium, high solids polyester clear coat that offers outstanding chemical resistance, gloss retention, and long lasting durability. Offers excellent holdout as an anti-graffiti coating on locomotives, automobiles, buses, tractor trailers and fleets. Also ideal for manufacturers and in marine applications like yachts as well as light aircraft. AG800 is compliant with most known applicable air regulations when the proper activator and reducers are used. AG800 has unique nonstick qualities to resists brake dust, graffiti, and other substances from sticking to the film or coating. AG800 is durable enough to with stand harsh cleaners.

ACTIVATOR & REDUCER

HAG800 Activator
MPS20 Standard Reducer

MIXING RATIO

Mix one (1) part AG800 Part A with one (1) HAG800 Part B activator. AG800 may be reduced up to 10% by volume prior  to application with selected reducer. POT LIFE at 77° F 2-hour minimum (without accelerator) CLEAN UP Use Lacquer Thinner or zero VOC solvents.   (Check local regulations.)

PHYSICAL DATA

Solids wt. (as mixed)47%

VOC as mixed 2.25

Color Clear

DRY / FLASH TIMES
Air Dry at 77° F
Flash between coats 20-40 minutes
Tack free 1 hour
Dust free 2 hours
Tape Time 24-48 hours

GUN SETUPS
CONVENTIONAL
Gravity Feed 1.4 mm – 1.6 mm
Siphon Feed 1.4 mm – 1.8 mm 

AIR PRESSURES
Conventional at Gun
Gravity Feed 30 – 40 psi
Siphon Feed 35 – 45 psi
HVLP at cap 8 – 10 psi

SURFACE PREPARATION
Use Northstar Clean Wipe (S10) to clean substrate free of grease, dirt, and foreign contaminants.

APPLICATION
Apply 2 medium wet coats over substrate AG800 may be reduced up to 10% Allow 20-40 minutes between coats Scuff after 24 hours before recoating Clean gun after spraying is completed.

MSDS/TDS

    There are no products in this category.