Loading... Please wait...

Categories

New Products

CC2.1 G CRYSTALINA CLEAR 2.1 GALLON

  • Crystalina 2.1 Clear. But it at bdautopaint.com
Price:
$84.00 (inc Sales Tax) $84.00 (exc Sales Tax)
SKU:
CC2.1 G
Brand:
Weight:
11.05 LBS
Shipping:
Calculated at checkout
Quantity:


Product Description

gentec.png

 

 

Crystalina Clear 2.1

Crystalina Clear 2.1 "CC 2.1" is a 2K ready-to-spray, high quality clear that meets all applicable rules for VOC compliance. Crystalina Clear 2.1 is “water white” which eliminates concerns of color change over some basecoat colors, especially white. Crystalina Clear 2.1 has outstanding buffing capabilities, excellent scratch resistance, and a superior gloss for a glamour appearance.  

4 per case

Warranty Information

Crystalina Clear 2.1

Crystalina Clear 2.1 "CC 2.1" is a 2K ready-to-spray, high quality clear that meets all applicable rules for VOC compliance. Crystalina Clear 2.1 is “water white” which eliminates concerns of color change over some basecoat colors, especially white. Crystalina Clear 2.1 has outstanding buffing capabilities, excellent scratch resistance, and a superior gloss for a glamour appearance.

ACTIVATORS

GH01 Fast Activator
GH02 Medium Activator
GH03 Slow Activator
MIXING RATIO

Mix four (4) parts CRYSTALINA CLEAR with one (1) part appropriate activator. No reduction is necessary. A566 accelerator may be used up to 2 ounces per gallon or ½ ounce per quart for enhanced drying. (Pot life will be compromised)

POT LIFE AT 77° F

2 hours (without accelerator)

CLEAN UP

Use NORTHSTAR Lacquer thinner or zero VOC solvents. (Check local regulations)

PHYSICAL DATA

Solids wt. (as mixed) 38%

VOC as mixed 2.1

Color Water white

DRY / FLASH TIMES

Air Dry at 77° F

Flash between coats 15-30 minutes

Dust free 40 minutes

Tack free 15-30 minutes

Sand & Buff 12-16 hours

Force Dry

Flash before force dry 15 minutes minimum

Force dry time 40 minutes at 140 F

Sand & Buff After 2 hour cool down

COLOR SANDING

Wet sand with 1000 to 1500 wet or dry paper, then buff with appropriate compounds and glazes to

achieve a high gloss finish.

GUN SETUPS

Conventional

Gravity Feed 1.3 mm – 1.5 mm

Siphon Feed 1.3 mm – 1.5 mm

AIR PRESSURES

Conventional at Gun

Gravity Feed 35 – 45 psi

Siphon Feed 40 – 50 psi

HVLP at cap 8 – 10 psi

SURFACE PREPARATION

Basecoat should be smooth, uniform, and should not have excessive dry over-spray. If needed, nib and re-base to insure a smooth uniform surface. Avoid touching basecoat with fingers. Use only tack rags designed for wiping off basecoat.

APPLICATION

Apply 2 medium wet coats over substrate to desired film thickness
Allow 15-30 minutes between coats
Scuff after 24 hours before applying topcoat or recoating
Clean gun after spraying is completed
Note: Flex additive is recommended when flexible part is not on vehicle
Download CC 2.1 Crystalina Clear 2.1 MSDS
File Size: 13.80 Kb

Download CC 2.1,4.4 Crystalina Clear TDS
File Size: 17.41 Kb
Crystalina Clear TDS

Additional Info
% Solids By WT.:40.79
Spec. Gravity:.99
LBS Per GL:8.28
% Total Exempts :41.78
Coating VOC g/l:315.08
Coating VOC lbs/gal:2.62
Material VOC g/l:172.96
Material VOC lbs/gal:1.44

Find Similar Products by Category

Customers Who Viewed This Product Also Viewed

Add to Wish List

Click the button below to add the CC2.1 G CRYSTALINA CLEAR 2.1 GALLON to your wish list.

Related Products

You Recently Viewed...